2563 Farnam St., Omaha NE  68131   |   800.228.9750   |   phone 402.422.0430   |   fax 402.345.1567   |   Search Our Inventory

Fluid power
valves
& Jiffy
Products

AAA Products International is a full line manufacturer of directional control valves (1/4" NPTF through 2" NPTF ports). AAA specializes in unique applications be it one or a thousand valves. We have a reputation for offering valves for the toughest applications. Our product delivery is the best in the industry.

AAA also specializes in the manufacturing of hydraulic or electric drive drilling, tapping and rod threading units for high production. These units are compact, versatile and offer the widest range of power for their size in the industry.

AAA Products International is committed to provide our customers with superior products of premium quality. Along with a full line of standard products, they offer over 200 special customer specific products to fit their unique applications. They promise unsurpassed customer service, exceptional delivery and competitive prices.
 

IMPORTANT FEATURES OF AAA VALVES
(ONE OF THE TOUGHEST VALVES IN THE WORLD)

  • A MINIMUM OF PARTS
  • SIMPLICITY OF OPERATION
  • UNDERSTOOD BY ANYONE
  • STANDARD LEAK TIGHT O-RING SEALS ARE AVAILABLE WORLD-WIDE

 

  
GOOD METERING
NON-SHOCK REVERSAL
Whether you use manual,
electric or pilot-operated
valves, the tapered flow
grooves give a smooth reversal
of air flow, eliminating shock
on lines and components.		 LARGE DIAMETER
SPOOL FOR HIGH FLOW
Competitive 1/2" valves
have 5/8" or 3/4" diameter
spool. AAA spools are 1-1/8",
allowing room for seal retaining
glands between the flow
grooves without sacrificing
flow.
NO BITE! NO PINCH! NO
WASHOUT OF O-RINGS!
SIMPLE AND EFFICIENT!
A long angle on the flow
grooves lifts the O-ring out of
the groove as the spool shifts.
No seal failure even at twice
rated pressure.		 AAA VALVES ARE SELF CLEANING
BY FLOW
PRESSURE EITHER WAY!
AAA valves can be used
with pressure or vacuum on
any port because there are no
cups, flanges or one direction
seals.
Solenoid Controlled, Pilot Operated Air Valves
4-way: Vacuum to 250 PSI
 Manual Lever Controlled Air Valves
4-way: Vacuum to 250 PSI
Inventory
ES02 1/4" single solenoid 2 position din coil
ES03 3/8" single solenoid 2 position din coil
ESS3 3/8" double solenoid 2 position din coil
ESY3 3/8" double solenoid 3 position closed center

S02 1/4" single solenoid 2 position
S03 3/8" single solenoid 2 position
S04 1/2" single solenoid 2 position
S06 3/4" single solenoid 2 position

SS2 1/4" double solenoid 2 position
SS3 3/8" double solenoid 2 position
SS4 1/2" double solenoid 2 position

SY2 1/4" double solenoid 3 position
SY3 3/8" double solenoid 3 position
SY4 1/2" double solenoid 3 position		 Inventory
HD2 1/4" 3 position detent
HD2Q 1/4" 2 position detent
HD3 3/8" 3 position detent
HD4 1/2" 3 position detent
HY2 1/4" 3 position spring centered
HY3 3/8" 3 position spring centered
HY4 1/2" 3 position spring centered
Foot Pedal / Treadle Controlled Air Valves
4-way: Vacuum to 250 PSI		 Remote Pilot Controlled Air Valves
4-way: Vacuum to 250
Inventory
F02 1/4" 2 position spring return
F03 3/8" 2 position spring return
F04 1/2" 2 position spring return
TY2 1/4" 3 position spring centered closed center
TY3 3/8" 3 position spring centered closed center		 Inventory
R02 1/4" single pilot 2 postion spring return
R03 3/8" single pilot 2 postion spring return
R04 1/2" single pilot 2 postion spring return
RR2 1/4 " double pilot 2 position
RR4 1/2" double pilot 2 position
Jiffy Drill
Compact Drilling Unit

SPECIFICATIONS*
Stroke Length: 0" to 3-1/2" maximum‡
Drill Capacity: 1-1/2" in 1018 steel
Spindle RPM: 5000 RPM maximum
Spindle Type: #3 Morse (shown) - others available
Spindle Torque: 15 - 3700 in.-lbs. maximum
Drill Thrust: 400 - 2500 lbs. maximum
Feed Cylinder: Extend - 3.15 in.˛ rear piston area
Retract - 1.37 in.˛ front piston area
Weight: 39 lbs. approximately

 Jiffy Tap
Compact Tapping Unit

SPECIFICATIONS*
Standard Stroke Length: 0" to 2-1/8"‡
Extended Stroke Length: 0" to 3-3/8"‡
Tap Capacity: 1-1/2" NPT in cast iron
Spindle RPM: 3000 RPM maximum
Spindle Taper: #4 Jacobs male taper
Spindle Torque: 15 - 3700 in.-lbs. maximum
Weight: 28 lbs. with hydraulic motor

Terms and Conditions

  Copyright 2005-2010 Skarda Equipment Company, Inc.

Legal